6ft x 4ft Fully Framed Closeboard Fence Panel Overview
Our 6ft x 4ft Fully Framed Closeboard Fence Panel is a strong, pressure-treated timber panel designed for residential garden boundaries. Measuring 6ft wide x 4ft high (1.83m x 1.22m), it provides clear boundary definition while maintaining a more open appearance than taller fence panels.
The panel combines traditional vertical featheredge boards with heavy-duty internal rails and substantial side battens. This creates a rigid, neatly framed design that is particularly well suited to installation between timber fence posts.
Heavy-Duty 75x32mm Backing Rails
This 4ft-high panel is constructed with 3 x 75x32mm internal backing rails. These substantial rails provide greater rigidity than the lightweight supports commonly used in standard framed fence panels.
The heavy-duty construction helps the panel remain square and stable while supporting the vertical featheredge boards across its full width.
Pressure-Treated Timber for Long-Term Protection
All timber components used in this panel are pressure-treated to protect against rot, fungal decay, and insect attack. This treatment helps preserve the timber in damp and exposed outdoor conditions while reducing the need for frequent maintenance.
4ft Panel for an Approximate 4ft 6in Finished Height
At 4ft high (1.22m), this panel is a practical choice for front gardens, side boundaries and patio areas where clear separation is required without completely enclosing the space.
When installed above a 6-inch (150mm) gravel board, it creates a finished fence height of approximately 4ft 6in (1.37m). The gravel board also separates the bottom of the panel from direct contact with the ground, helping to protect the timber from ground moisture.
Designed for Installation with Timber Fence Posts
The 50x32mm side battens provide wide, flat fixing points for securing the panel to timber fence posts. Installers can screw or nail directly through the side framing, helping to create a secure and neatly finished fence line.
Why Choose This 6ft x 4ft Fully Framed Closeboard Fence Panel?
- Measures 6ft wide x 4ft high (1.83m x 1.22m)
- Creates an approximate 4ft 6in finished height with a 6-inch gravel board
- Fully framed construction for a clean, professional finish
- 3 x 75x32mm heavy-duty internal backing rails
- 50x32mm side battens for secure fixing to timber posts
- Pressure-treated timber for long-term outdoor protection
- Vertical featheredge boards for clear garden boundary definition
Strong, Stable and Neatly Finished
This 6ft x 4ft fully framed closeboard fence panel combines the traditional appearance of vertical featheredge fencing with the convenience of a ready-made framed panel. Its heavy-duty rails and substantial side battens provide a strong, stable panel with a clean finish for timber-post installations.
