6ft x 4ft 6in Fully Framed Closeboard Fence Panel Overview

Our 6ft x 4ft 6in Fully Framed Closeboard Fence Panel is a strong, pressure-treated timber panel designed for residential garden boundaries. Measuring 6ft wide x 4ft 6in high (1.83m x 1.37m), it provides effective screening while maintaining a more open appearance than taller fence panels.

The panel combines traditional vertical featheredge boards with heavy-duty internal rails and substantial side battens. This creates a rigid, neatly framed design that is particularly well suited to installation between timber fence posts.

Heavy-Duty 75x32mm Backing Rails

This 4ft 6in-high panel is constructed with 3 x 75x32mm internal backing rails. These substantial rails provide greater rigidity than the lightweight supports commonly used in standard framed fence panels.

The heavy-duty construction helps reduce the risk of twisting or sagging, allowing the panel to remain stable and correctly aligned over time.

Pressure-Treated Timber for Long-Term Protection

All timber components used in this panel are pressure-treated to protect against rot, fungal decay, and insect attack. This treatment helps preserve the timber in damp and exposed outdoor conditions while reducing the need for frequent maintenance.

4ft 6in Panel for an Approximate 5ft Finished Height

At 4ft 6in high (1.37m), this panel is a practical choice for side boundaries and gardens where moderate privacy is required. When installed above a 6-inch (150mm) gravel board, it creates a finished fence height of approximately 5ft (1.52m).

This combination provides useful screening while allowing more light over the boundary than a full 6ft fence.

Designed for Installation with Timber Fence Posts

The 50x32mm side battens provide wide, flat fixing points for securing the panel to timber fence posts. Installers can screw or nail directly through the side framing, helping to create a secure and neatly finished fence line.

Why Choose This 6ft x 4ft 6in Fully Framed Closeboard Fence Panel?

• Measures 6ft wide x 4ft 6in high (1.83m x 1.37m)
• Creates an approximate 5ft finished height with a 6-inch gravel board
• Fully framed construction for a clean, professional finish
• 3 x 75x32mm heavy-duty internal backing rails
• 50x32mm side battens for secure fixing to timber posts
• Pressure-treated timber for long-term outdoor protection
• Vertical featheredge boards for effective garden screening

Strong, Stable and Neatly Finished

This 6ft x 4ft 6in fully framed closeboard fence panel combines the traditional appearance of vertical featheredge fencing with the convenience of a ready-made framed panel. Its heavy-duty rails and substantial side battens provide a strong, stable panel with a clean finish for timber-post installations.